Almost every iPhone and iPad user is familiar unpleasant situation, when a month/six months/year charge cable ordered to live long. Occurs mainly due to the fact that the cord is in a particular location is exposed to frequent and strong bends. This is usually the beginning, near the plug. As a result, the insulation deteriorates and the wires break. Compounding the situation is the design of the plug. Blogger Cmon Trey suggested a trick that will help protect the power cord Lightning and headphone cords from mechanical damage.
In order to alienate unpleasant moment, you need to disassemble the old pen and to get out of it spring. Then the spring goes on the cable near the connector. This is done not by the principle of a spring ring on the keyring, and through the middle of the spring. According to Tray, make it is easy.
To protect soft wire, you can further reinforce it with tape in the place where it will be worn spring, otherwise the tip, where the rings are pressed tightly, it can be dangerous to mess it up. After the operation, the electrical tape should be removed.
It remains to sum up the spring to the plug and put it on. All looks in the end, more than aesthetically pleasing, and the cable is securely protected from dangerous sharp bends. Spring metal and it simply will not allow to bend the wire so hard that he eventually deformed and out of order.
